惠州午夜神器數控機械有限公司
您的當前位置: 首 頁 >> 新聞資訊 >> 行業新聞

數控鑽床維護分為哪些方麵? - CNC鏜銑床 廣東鏜銑床哪家好 惠州龍門價格

發布日期:2018-12-18 作者: 點擊:

數控係統的維護

Maintenance of numerical control system


1.嚴格遵守操作規程和日常維護製度;

1. strictly observe the operation rules and routine maintenance system.


2.防止灰塵進入數控裝置內,漂浮的灰塵和金屬粉末容易引起元器件間絕緣電阻下降,從而出現故障甚至損壞元器件;

2. to prevent dust from entering the numerical control device, the floating dust and metal powder can easily cause the insulation resistance between the components to decline, so as to fail or even damage the components.


3.定時清掃數控櫃的散熱通風係統;

3. to clear the cooling and ventilation system of the control cabinet.


4.經常監視數控係統的電網電壓,電網電壓範圍在額定值的85%~110%;

4. the grid voltage of the numerical control system is constantly monitored, and the voltage range of the grid is 85% to 110% of the rated value.


5.定期更換存儲器用電池;

5. regular replacement of storage battery;


6.數控係統長期不用時的維護:經常給數控係統通電或使數控鑽床運行溫機程序;

6. maintenance of CNC system for a long time: often to power the NC system or make CNC drilling machine running temperature program.


7.備用電路板的日常維護。

7. the daily maintenance of the standby circuit board.


機械部件的維護

Maintenance of mechanical parts


1.絲杠和導軌的維護:

1. maintenance of screw and guide rail:


①定期檢查、調整絲杠螺母的軸向間隙,保證反向傳動精度和軸向剛度;

Check and adjust the axial clearance of the screw nut regularly to ensure the accuracy and axial rigidity of the reverse transmission.


②定期檢查絲杠支撐與床身的連接是否鬆動以及支撐軸承是否損壞。如有以上問題要及時緊固鬆動部位,更換支撐軸承;

Regularly check whether the connection between the screw support and the lathe is loose and whether the supporting bearing is damaged. If there are any problems mentioned above, fasten the loose parts and replace the supporting bearings in time.


③采用潤滑脂的滾珠絲杠,每半年清洗一次絲杠上的舊油脂,更換新油脂。用潤滑油潤滑的滾珠絲杠,每天機床工作前加油一次;


3. Use grease ball screw, wash the old grease on the lead screw every half a year to replace the new grease. Lubricate the ball screw with lubricating oil, and fill it every day before working.


④注意避免硬質灰塵或切屑進入絲杠防護罩和工作過程中碰擊防護罩,防護裝置一有損壞要及時更換。


4. Pay attention to avoid hard dust or chip to enter the protective cover of the screw rod and bump into the protective cover during the working process.


2.主動軸的維護

2. maintenance of active axis


①定期調整主軸驅動帶的鬆緊程度;

(1) adjusting the tightness of the spindle driving belt regularly;


②防止各種雜質進入油箱。每年更換一次潤滑油;

To prevent all kinds of impurities from entering the tank. Replace the lubricating oil once a year.


③保持主軸與刀柄連接部位的清潔,需及時調整液壓缸和活塞的位移量;


3. To keep the connection between the spindle and the hilt clean, we need to adjust the displacement of the hydraulic cylinder and piston in time.


④要及時調整配重。


(4) to adjust the weight in time.


對於機床,午夜神器要用心定期維護保養,延長元器件的壽命和零部件的磨損周期,預防各種故障,才能提高數控鑽床的平均無故障工作時間和使用壽命 。

For machine tools, we should maintain regular maintenance, prolong the life of components and the wear cycle of parts and spare parts, prevent all kinds of faults, so as to improve the average working time and service life of the NC drilling machine.


      午夜神器數控機械有限公司始終秉承著“客戶至上,永久服務”的經營理念,以創新、團結、誠信、服務為原則不斷發展壯大。公司在全體員工多年精心努力下,建立了完善的機械設計研發、製造、裝配、檢驗、銷售服務等經營體係。在2016年榮獲“中國綠色環保產品”、“中國3.15誠信企業”、“質量信得過產品”、“質量、服務、信譽AAA企業”等榮譽。


       公司已經通過國家高新技術企業認定並獲得多個發明專利和實用新型專利,午夜神器機械專注於高品質專業生產數控龍門加工中心臥式鏜銑床、立式加工中心、臥式加工中心、炮塔鑽銑加工中心,彎立柱鑽銑雕加工中心等產品。公司總部位於台灣省台中市(和原精密機械工業有限公司)。            臥式加工中心 廣東鏜銑床哪家好 惠州龍門價格


       多年來,公司不斷引進高精度的大型加工設備。結合多年專業機床製造技術和經驗,通過與世界知名品牌的技術合作與創新,研製和開發了一係列優質、高精、高效、實用的機床產品。            臥式加工中心 廣東鏜銑床哪家好 惠州龍門價格

臥式加工中心  廣東鏜銑床哪家好  惠州龍門價格

惠州午夜神器數控機械有限公司

本文網址:http://www.ag0154.com/news/717.html

關鍵詞:CNC鏜銑床,廣東鏜銑床哪家好,惠州龍門價格

最近瀏覽: